With alternatively-fuelled cars continuing to rise rapidly in popularity, component specialist, Comline, has highlighted the misconception of assuming internal combustion engine steering and suspension components and electric vehicle steering and suspension components are the same. 

Comline Ireland's Group Senior Business Line/Product Manager, Peter Wallace, says that technicians need to be cautious when fitting steering and suspension components as the task may not be as straightforward as they think. Following comprehensive research, while developing Comline Ireland’s growing steering and suspension catalogue, Peter has noticed scenarios where parts for an EV are different to their internal combustion engine (ICE) cousins; for example, on an electric Peugeot 208 and Opel Corsa-F, the original anti-roll bar link is lighter than the one fitted to models with an ICE.

Peter explains, “My gut instinct is that these parts have been made lighter to compensate for the additional battery weight. The issue, though, is that these components will look identical to the original specification but will comprise of subtle rotational or dimensional differences; therefore, if fitted, those components will cause some issues when the vehicle is being driven, such as veering left-to-right (yaw ratio) and vice-versa.”

He adds, “What’s more, sticking with the same vehicle layout, the orientation of the bush in the lower wishbone arms are different on the electric version, which will allow for similar comfort as the ICE version when going over bumps, again, due to weight. The same applies to the ball joint, which has a different articulation angle and mounting face to pinch bolt height. These are things that technicians need to be aware of and why Comline Ireland’s cataloguing needs to be accurate and up-to-date.”

Peter believes this trend is a result of electric vehicle manufacturers changing their approach when developing parts for their vehicles. He comments, “When the Nissan Leaf (2010-2017) was launched, it was equipped with components from models within Nissan’s existing range, such as arms, links, ball joints and track rod ends off a Nissan Juke (2010-onwards). However, because of scenarios like the one identified above, VMs are having to change tact. The Tesla Model 3, Audi e-tron and Volkswagen ID.3 are all examples where every part is new, so VMs are spending significant amounts of time and resources in developing new parts. As a result, technicians need to be careful and may need to adapt their fitting techniques because it’s not just ‘another vehicle’; it’s a heavier vehicle and boasts different characteristics, wear and tear.”

Comline Ireland is set to launch 50 parts that will only fit EV vehicles, which will be available to its distributors and technicians over the course of the next three-to-six months. To learn more about Comline Ireland’s evolving steering and suspension range visit: https://www.comline.uk.com/products/steering-suspension